Corner Adjustment on the XK3190-DS1M Indicator
Entering corner parameters by hand on an XK3190-DS1 or DS1M: cell layout in axis pairs, the Stable lamp rule, and the six-step menu sequence with the display at each stage.
countinue reading
Keli and Yaohua Indicator Compatibility
Analog indicators from both makers share the same DB9 load cell pinout and the same calibration sequence, so swapping one for the other needs no rewiring.
Installing a Truck Scale with the XK3190-A9
A 3 x 18 m weighbridge from container to calibration in six steps, with the DB9 pin table and the two jumpers a four-wire load cell needs.
DS1M Indicator Setup with Digital Load Cells
Commissioning a DS1M or DS3M with BTA-D, KDS-D or VLC-121D cells: addressing one cell at a time, cable colours, grouping, and the calibration steps that matter.
Using Analog Load Cells with a Digital Indicator
A conversion board turns a conventional analog load cell into a digital one. Terminal assignments on both sides of the board, the boards available per protocol, and the 12 V DC rule.