Installing a Truck Scale with the XK3190-A9
A 3 x 18 m weighbridge from container to calibration in six steps, with the DB9 pin table and the two jumpers a four-wire load cell needs.
countinue reading
Digital Load Cells Explained: ISN, RS-485 and Automatic Corner Correction
How a digital load cell differs from an analog one in practice: protected electronics, per-cell diagnostics, automatic corner correction, and how the ISN count converts into weight.
Installing Digital Load Cells on a Truck Scale
A 120 tf weighbridge from wiring to corner correction: cable colours, the four power supply rules, cell positioning by address, where tilt error comes from, and the K correction formula worked through.
DS1M Indicator Setup with Digital Load Cells
Commissioning a DS1M or DS3M with BTA-D, KDS-D or VLC-121D cells: addressing one cell at a time, cable colours, grouping, and the calibration steps that matter.
MK-Di01 Indicator Setup with Digital Load Cells
Commissioning the MK-Di01, D2008H and D2008FA with MKCells LU-D or AMCells QS-D cells: identifying the protocol, setting addresses and wiring the bus, step by step on video.
Using Analog Load Cells with a Digital Indicator
A conversion board turns a conventional analog load cell into a digital one. Terminal assignments on both sides of the board, the boards available per protocol, and the 12 V DC rule.